How to Rebuild a Cordless Power Tools Battery

Cordless power tools are a great convenience for both the professional and the do-it-yourself homeowner. Unfortunately, the rechargeable battery packs that power these tools usually fail within 18 to 24 months. What many tool owners do not know is that within these battery packs is a simple arrangement of rechargeable size C batteries, which they can rebuild themselves.

DEWALT DE9071 Cordless Power Tools Battery
1500mAh only Price: £25.49

Step 1: simply done if the pack has screws that hold the case together. If the pack is a solid, one-piece molded unit, you will need to cut it open.

Step 2: Attach a chisel tip to the soldering iron, and heat it up. Use the tip to cut an outline along the top of the base of the battery pack. Pull off the top and set it aside. Inside will be a group of C-size rechargeable batteries in a generic cardboard casing. Read the text on them, which will indicate whether the cells are Nickel-Cadmium (Ni-Cad) or Nickel Metal-Hydride (Ni-Mh).

HITACHI EB 12G Cordless Power Tools Battery
2200mAh only Price: £22.50

Step 3: Make sure that you purchase the same type of rechargeable battery cells unless you are sure that your charger and tool will operate with the other type. If so, use Ni-Mh batteries -- they are superior to Ni-Cad cells in that they do not develop a "memory" when charged to less than full capacity.

Step 4: Take notes regarding the way the batteries are connected and arranged so that you can put the new cells in the same way. Heat up the connector to each battery in the pack and remove it.

HITACHI EB2420 Cordless Power Tools Battery
2200mAh only Price: £54.99

Step 5: Use a rotary tool with a wire brush attachment to clean off any oxidation on the contacts and connecting wires left in the pack. Refer to your notes and install the new batteries the same way as the previous arrangement. Solder the new connections securely.

Step 6: Put the top of the battery case back on and fasten the screws, or for the molded pack that has been cut open, use a liberal amount of an epoxy adhesive to glue the pieces back together. Be sure to let the pack charge fully (overnight) before using it for the first time.

How to Extend Drill Battery Life

How to stop buying expensive batteries so often. How to extend the life of your power tool battery. Works for all rechargeable batteries. (9 volt, 12 volt, 18 volt, 19.5 volt, and higher.)

1. Do you feel better when you are in a controlled environment? Your power equipment batteries do too. Remove the batteries from the power equipment. You should store the power tool in the climate controlled area also. They perform better at room temperature.
   
2. Place the plastic protective cap on the battery for safety reasons. If left uncapped you could receive a shock or they could cause a fire if the terminals contact a metal surface.
   
3. Place the batteries in a environmentally controlled area (example a closet). Batteries will last in most situations twice as long as leaving them in a cool, hot, cold or damp garage or vehicle.
   
4. Charge the batteries about once every 45 days, just to keep them fresh in case you need to use them and you know you will ( example Christmas lights, gifts etc.).